Data envelopment analysis based on team reasoning

Existing approaches to data envelopment analysis focus mainly on the derivation of the efficiency of the individual decision‐making unit (DMU) or on the calculation of the weights of multiple inputs or outputs, but pay little attention to the team interest of all the DMUs. Motivated by the idea of team reasoning, in which the benefit of the team is of higher importance than that of each individual, this paper considers all the DMUs as a team and introduces the team indexes including the overall efficiencies, variance, boundaries of all the DMUs, and relationships between DMUs. Several models are first developed to estimate values of the team indexes based on which decision makers can provide their preferences regarding them. Then, models are established to obtain the interval efficiencies of individual DMUs under the condition that the team indexes are satisfied. Several examples are given to illustrate the proposed approaches and verify their applicability.     

A first-principles investigation on mechanical and metallic properties of titanium carbides under pressure

The titanium carbides are potential candidates to achieve both high hardness and refractory property. We carried out a structural search for titanium carbides at three pressures of 0 GPa, 30 GPa and 50 GPa. A phase diagram of the Ti-C system at 0 K was obtained by elucidating formation enthalpies as a function of compositions, and their mechanical and metallic properties of titanium carbides were investigated systematically. We also discussed the relation of titanium concentration to the both mechanical and metallic properties of titanium carbides. It has been found that the average valence electron density and tractility improved at higher concentrations of titanium, while the degree of covalent bonding directionality decreased. To this effect, the hardness of titanium carbide decreases as the content of titanium increases. Our results indicated that the titanium content significantly affected the metallic properties of the Ti-C system.     

基于滑模的运载器主动段俯仰通道姿控系统设计

与传统比例-积分-微分（PID）控制方法相比，滑模控制（SMC）方法可以比较容易地将不确定性纳入控制器设计中，从而增强系统的鲁棒性。探索了SMC技术在运载器主动段姿态控制中的工程应用，首先通过分析基于趋近律的SMC系统，提出了降低不连续切换项系数的需求，然后研究了基于干扰上界的SMC方法。三通道小偏差仿真结果验证了两种方法的控制效果，表明第2种控制器的鲁棒性更好，稳态误差小，同时发动机喷管摆角需求较小。     

On cutting temperatures in high and ultrahigh-speed machining

Since Dr. Carl Salomon proposed the well-known hypothesis on cutting temperatures in 1931, the debate on the hypothesis has never stopped. It shows that ev     

第七届世界军人运动会核与辐射风险评估与控制

武汉市涉核单位众多,存在一定的核与辐射事故风险。通过对武汉市举办第七届世界军人运动会可能存在的核与辐射风险因素进行识别及评价,确定可能发生的12类核与辐射事故类型及风险水平,进而有针对性的制定风险防控措施,做到辐射应急管理关口前移,在保证军运会期间核技术利用单位正常生产活动的基础上有效的保障了核与辐射安全。     

下荆江熊家洲至城陵矶弯曲型河段河床调整规律

三峡水库运用后, 坝下游水沙过程发生了较大调整, 对下荆江熊家洲至城陵矶弯曲型河段河床冲淤演变造成较大影响, 从而对本河段河势稳定、防洪、航运等可能造成不利的影响, 基于此, 根据最新实测资料分析水沙条件变 化及其对本河段河床调整规律的影响。研究成果显示: 三峡水库运用后, 水流含沙量大幅减小, 且水库调蓄导致熊 家洲至城陵矶河段在枯水期径流量明显增加, 使弯道主流长期偏向于凸岸, 引起凸岸边滩大幅冲刷, 这是近期该河段发生“撇弯切滩”的主要原因之一; 随着三峡上游干支流水库群陆续建成运用, 坝下游河道将会长期遭受清水冲 刷, 河床仍将呈单向冲刷下切的趋势, 弯顶段主流平面摆动仍将较大, 弯道顶冲点也将相应下移, 导致主流贴岸距离 进一步下延, 引起河道岸线的崩退, 未来一段时期内典型弯曲型河道的局部河势变化仍将明显。     

基于目标级联技术的含风电互联电网机组组合策略

针对含风电互联电网日前安全约束机组组合的规模大、约束复杂、求解困难等问题,提出基于目标级联分析技术的分散协调优化策略。将问题分解为负责区域间边界节点电压相角协调的上层优化问题和以并行方式独立优化各区域发电计划的下层优化问题。下层优化以弃风电量期望和电量不足期望,量化各区域内风电、负荷预测误差,以及常规机组强迫停运等系统运行不确定性所带来的风险,并以罚函数的形式引入目标函数,以综合优化系统可靠性与经济性。2区域12节点系统和IEEE RTS96三区域互联系统算例仿真验证所建模型和算法的有效性。     

金沙江上游水电站应对白格堰塞湖灾害的措施及经验

2018年10月、11月,西藏自治区昌都市江达县白格村两次发生山体滑坡造成金沙江断流并形成白格堰塞湖,给金沙江上游沿岸人民生产生活设施造成巨大安全威胁和超过百亿元的经济损失。华电金沙江上游水电开发有限公司组织所属企业及参建单位快速应对,采取撤离避让、工程防护、人工干预、生产恢复,推动后续处置、风险评估等措施,最大限度减轻了对金沙江上游叶巴滩、拉哇、巴塘、苏洼龙等在建水电站的灾害损失和后续影响,为类似灾害的处置提供借鉴经验。     

Anatase/rutile-TiO2 hollow hierarchical architecture modified by SnO2 toward efficient lithium storage

Hierarchical architecture of anatase/rutile-mixed phases TiO₂ with hollow interior was successfully fabricated via a Topotactic synthetic method, including the synthesis of CaTiO₃ precursors and transforming them into TiO₂ through ion-exchange process. The as-synthesized TiO₂ hierarchical architectures as the anode materials were used as lithium-ion batteries (LIBs). Compared with TiO₂ samples, the TiO₂@SnO₂-5% shows the improved lithium storage capacity, cycling performance and rate properties. The impedance of the TiO₂ electrode decreases evidently after adding few amount of SnO₂. The hollow hierarchical structure with different compositions provide much more active sites, and well connect interface among anatase, rutile, and SnO₂, facilitating the electron and ion transport quickly and efficiently. Addition appropriate number of SnO₂ not only well kept the hierarchical architecture but also enhanced the capacity and conductivity of the TiO₂ sample. As a result, TiO₂@SnO₂-5% exhibited excellent lithium storage performance.